Vehicle surveillance camera wiring harness 001 black pcb molded wire harness custom cable
The extension cable is made of tinned copper wire with PVC, SR-PVC, XL-PVC, XL-PE and other insulating materials. It is widely used in electronic equipment such as audio, digital, video, car audio, TV, typewriter, notebook, cash register, telephone, CD-ROM, VCD, DVD, copier, printer, wireless instrumentation, lighting fixtures, household appliances and other electrical equipment internal wiring field.
Its electronic wire type is UL1007.
Rating is 80 deg C, 300 Vac, Horizontal flame. optional - 60 deg C or 80 deg C Oil.
Conductor is 32 AWG - 16 AWG, Solid or Stranded.
Insulation is Extruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
Standard is Appliance Wiring Material UL 758.Marking is General.
Use is Internal wiring of appliances. Tags may indicate the following: 600 V Peak - For Electronic Use Only
The advantages of using UL material are UL758, UL1581 and CSA, C22.2 NO.210, UL VW-1 and CSA FT1 vertical combustion test, PVC insulation with low lead and cadmium, and compliance with SONY SS-00259 environmental substance management standard. The only disadvantage is that the cost is relatively high
Process requirements:Each wire needs to be sealed with a riveting terminal, after cutting the line,put the wire through the belows first. and then over the transparent sleeve wi th riveting terminal empty pin of rubber shell at ends blind plugging.Yellow clips must be installed after rubber shells at both ends are inserted into terminals.
Technical Requirements:100% electrical test of finished products, no short circuit break, wrong line, intermittent bad contact.Test conditions: insulation impedance≥10M “on-going impedance ≤l∞high-voltage DC300V 0.1.the outer wire shoudnt be damaged,dirty,and the core shall not be broken.Terminal crimping should be good and rel iable, and copper wire should not be exposed.All materials comply with EU RoHS directive.